Industrial Lubrication and Tribology
Covers all automotive and industrial applications of lubricants
Issue(s) available: 606 – From Volume: 1 Issue: 1, to Volume: 76 Issue: 5
Volume 75
Volume 74
Volume 73
Volume 72
Volume 71
Volume 70
Volume 69
Volume 63
Volume 58
Volume 23
Volume 22
Volume 21
Volume 20
Volume 19
Volume 18
Volume 17
Volume 16
Volume 15
Volume 14
Volume 13
Volume 12
Volume 11
Volume 10
Volume 9
Volume 8
Volume 7
Volume 6
Volume 5
Volume 4
Volume 3
Volume 2
Dynamic and stability analysis of crescent geometry-possessing textured journal bearing using nanolubricant
Deepak Byotra, Sanjay SharmaThis study aims to find the dynamic performance parameters of the journal bearing with micro geometries patterning the arc (crescent) shape textures provided in three specific…
Lubricating properties of thymol-based deep eutectic solvents
Ting Li, Zhipeng Zhang, Junhai Wang, Tingting Yan, Rui Wang, Xinran Li, Lixiu Zhang, Xiaoyi WeiThis study aims to prepare thymol-based deep eutectic solvents (DESs) and use them as lubricates for friction and wear tests to simulate the wear conditions of hybrid bearings.
Improving frictional and insulation performance with silica-coated titanium dioxide additives in grease
Kuo Yang, Yanqiu Xia, Wenhao Chen, Yi ZhangThe purpose of this study was to synthesize composite nanoparticles (TiO2@SiO2) via the chemical deposition method and investigate their efficacy as additives in…
Effect of oil film stiffness on vibration of full ceramic ball bearing under grease lubrication
Jian Sun, Junran Huang, Zhonghao Tian, Jinmei Yao, Yang Zhang, Lu WangThis paper aims to understand the vibration characteristics of full ceramic ball bearings under grease lubrication, reduce the vibration of the bearings and improve their service…
Experimental investigation of nanofluid lubrication on surface roughness under MQL aluminum alloy 6061-T6 series in drilling
Ehsan MirHosseini, Seyed Ali Agha Mirjalily, Amir Javad Ahrar, Seyed Amir Abbas Oloomi, Mohammad Hasan ZareThis study aims to investigate the impact of varying the number of minimum quantity lubrication (MQL) nozzles, wind pressure, spindle speed and type of lubrication on surface…
Identification of dynamic parameters of journal bearings in an asymmetric rotor-bearing system
Yinsi Chen, Yuan Li, Heng Liu, Yi LiuThe purpose of this study is to identify the dynamic parameters of journal bearings in asymmetric rotor systems without additional test runs or excitations.
Study on the tribological performance of self-lubricating thrust ball bearings with different embedded features
Ruifeng Liu, Yimin ZhangThe purpose of this paper is to develop a new type of embedded solid self-lubricating thrust ball bearing for conditions where grease lubrication cannot be used and to analyze its…
Influence of operating parameters on the silt erosion performance of bare and coated SS304 steel
Rajesh Kumar, Satish Kumar, Deepa MudgalThe purpose of this paper is to investigate the silt erosion performance of Bare, 75%Cr2O3 + 25%Al2O3 and 85%Cr2O3 + 15Al2O3-coated SS304 under various control parameters such as…
Investigating fretting wear mechanisms in Ti-6Al-4V: insights from residual stress and equivalent plastic strain analysis
Liwen Feng, Xiangyan Ding, Yinghui Zhang, Ning Hu, Xiaoyang BiThe study delves into the influence of wear cycles on these parameters. The purpose of this paper is to identify characteristic patterns of σRS and εPEEQ that discern varying wear…
Probing the effect of displacement on electrical contact tribological behavior at the risk frequency of nuclear safety DCS equipment
Dongwei Wang, Faqiang Li, Yang Zhao, Fanyu Wang, Wei JiangThis paper aims to study the tribological characteristics of the electrical contact system under different displacement amplitudes.
Predicting friction coefficient of textured 45# steel based on machine learning and analytical calculation
Zhenshun Li, Jiaqi Li, Ben An, Rui LiThis paper aims to find the best method to predict the friction coefficient of textured 45# steel by comparing different machine learning algorithms and analytical calculations.
Revealing the tribological mechanism of synergistic effect between MoDTC and P-containing additives in aluminum-based grease
Hui Zhao, Shunzhen Ren, Zhengbo Zhong, Zhipeng Li, Tianhui RenThis study aims to reveal the tribological mechanism of synergistic effect between MoDTC and P-containing additives in aluminum-based grease.
Tribological performance of ficus carica oil modified with ethylene vinyl acetate and sodium dodecyl benzenesulfonate
Audu Ibrahim Ali, Mohd Kameil Abdul Hamid, Mohd Azman Bin Abas, Mohd Farid Muhamad Said, Anthony Chukwunonso Opia, Izhari Izmi Bin Mazali, Zul Hilmi Bin Che DaudDue to the environmental issues caused by petroleum lubricants used in lubrication, the concept of creating various bio-lubricants requires research globally. Thus, this study…
Effect of pocket orientation on four pocket hybrid journal bearing operating with piezo-viscous polar lubricant
Vishal Singh, Arvind K. RajputThe present paper aims to analyse the synergistic effect of pocket orientation and piezo-viscous-polar (PVP) lubrication on the performance of multi-recessed hybrid journal…
A material perspective on advanced magnesium-ion batteries for electric vehicles
Raj Shah, Nikhil Pai, Andreas RosenkranzThis paper aims at analyzing the potential of new materials in magnesium-ion batteries (MIBs) with a particular focus on options for electrodes and electrolyte solutions while…
ISSN:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz